FORMULA:
Each 100 mL contains: | |
Dichlorvos (DDVP) | 60.0 g |
Chlorfenvinphos | 15.0 mL |
Emulsifier and vehicle* q.s.p | 100.0 mL |
*alkyl aryl sulfonate of calcium and xylol.
INDICATION:
It combines the carratic and bernicidal action of Dichlorvos+Chlorfenvinphos. With a single application, it fights ticks (Rhipicephalus microplus) and botfly (Dermatobia hominis) in cattle.
HOW TO USE:
Administer topically (externally). Prepare the dilution (1:400) at the time of use, according to the table below. Apply 1 liter of the mixture for every 100 kg of live weight to the animal with the help of a sprayer. Animals weighing ≥500 kg, apply 5 liters of the mixture, until the body is completely wet, especially in the regions most infested by parasites. In dairy cattle, apply after milking.
Carbeson® | Amount of water |
12.5 mL | 5 liters |
25.0 mL | 10 liters |
50.0 mL | 20 liters |
75.0 mL | 30 liters |
100.0 mL | 40 liters |
250.0 mL | 100 liters |
Changes in dosage and mode of use, at the discretion of the Veterinarian.
PREPARATION:
1 – Put a little drinking water in a clean container; 2 – Measure the desired amount of Carbeson®, taking care that the product does not come into contact with the skin or be inhaled;
3 – Add the product to the container, mixing with a stick (pre-mix);
4 – Fill the volume with water according to the table above;
5 – Transfer the mixture to a sprayer.
STIR THE MIXTURE WELL BEFORE USE
INDICATION:
It combines the carratic and bernicidal action of Dichlorvos+Chlorfenvinphos. With a single application, it fights ticks (Rhipicephalus microplus) and botfly (Dermatobia hominis) in cattle.
HOW TO USE:
Administer topically (externally). Prepare the dilution (1:400) at the time of use, according to the table below. Apply 1 liter of the mixture for every 100 kg of live weight to the animal with the help of a sprayer. Animals weighing ≥500 kg, apply 5 liters of the mixture, until the body is completely wet, especially in the regions most infested by parasites. In dairy cattle, apply after milking.
Carbeson® | Amount of water |
12.5 mL | 5 liters |
25.0 mL | 10 liters |
50.0 mL | 20 liters |
75.0 mL | 30 liters |
100.0 mL | 40 liters |
250.0 mL | 100 liters |
Changes in dosage and mode of use, at the discretion of the Veterinarian.
PREPARATION:
1 – Put a little drinking water in a clean container; 2 – Measure the desired amount of Carbeson®, taking care that the product does not come into contact with the skin or be inhaled;
3 – Add the product to the container, mixing with a stick (pre-mix);
4 – Fill the volume with water according to the table above;
5 – Transfer the mixture to a sprayer.
STIR THE MIXTURE WELL BEFORE USE
CARE IN HANDLING THE PRODUCT:
Wear eye protection: the product is irritating to the eyes. If the product comes into contact with the eyes, wash them immediately. Wear masks covering your nose and mouth: dangerous product if inhaled or inhaled. If there is inhalation or aspiration, look for a ventilated place. Wear rubber gloves, long-sleeved overalls , waterproof apron , and boots. Irritating and/or skin-absorbable product. Avoid contact of the product with skin and mucous membranes of the human body. In case of occasional accidents, wash the affected parts several times with soap and water, and seek medical attention.
GENERAL PRECAUTIONS:
Because it contains organophosphates, do not eat, drink or smoke while handling the product. Do not use the product after 24 hours of preparation. Do not use leaking equipment. Do not unclog nozzles, orifices and valves with your mouth. Do not handle the product with bare hands. Do not apply the product in the presence of strong winds. Keep children, pets and unprotected people away at the time of application. Do not store with food, drinks, medicines, hygiene and household products. Do not contaminate water collections of any kind. Dispose of empty packaging and product remains, as well as clean used equipment or containers safely, avoiding contamination of the environment. Keep the product in its original packaging. Do not reuse empty packaging.
WARNINGS:
Apply the product after milking. Do not use higher concentrations or with another phosphorus drug at the same time. It is not recommended to apply this product to cows in the last month of gestation. It is not advisable to bathe weakened, stressed or thirsty animals. Avoid applying this product during hours of sun and intense heat.
SIDE EFFECTS:
If the product causes intoxication, the most common adverse effects are nausea, vomiting, diarrhea, urination, pupil constriction, brococonstriction, bradycardia, bronchospasm, dyspnea, respiratory paralysis, salivation, sweating, depression, and Tremors.
ANTIDOTE:
In case of poisoning in animals, apply subcutaneously or intramuscularly 3 to 10 mL of 1% Atropine Sulfate. In case of poisoning in humans, call the doctor and apply 0.3 mL of 1% Atropine Sulfate, subcutaneously, repeating the dose every hour until the symptoms disappear.
PRESENTATIONS:
Vials containing 50 mL, 250 mL, and 1 L.
CONSERVATION:
Store the product in its original packaging, in a dry and cool place, at room temperature (between 15 ºC and 30 ºC), away from sunlight and away from the reach of children and pets.
GRACE PERIOD:
BOVINES: SLAUGHTER – 10 DAYS; MILK – 2 DAYS.
FOR MORE INFORMATION ON THE GRACE PERIOD, PLEASE REFER TO THE PRODUCT LEAFLET OR LABEL.